|
Education：
|
- Ph. D., Department of Mechanical Engineering, Yuan-Ze University (2009)
- M.S., Department of Mechanical Engineering, Yuan-Ze University (2003)
- B.S., Mechanical Design Engineering, National Formosa University (2001)
|
|
Experience：
|
- Assistant Engineer, NSRRC(2009-)
- Develop Department manager, Taiwan XMAC machinery Co., Ltd. (2007-2009)
- Mechanical Design Engineer, Crown One machinery industry Co., Ltd. (1998-1999)
- Mechanical Design Engineer, Yuan Shuay machinery industry Co., Ltd. (1996-1997)
|
|
Research Interests：
|
- Mechanism Design of Endstation Components
- Mechanical Design of Beamline Components
|
|
Selected Publications：
|
- Y. S. Chen., C. C. Chiu., and Y. D. Cheng., “Influences of operational conditions and geometric parameters on the stiffness of aerostatic journal bearings, ” Precision Engineering, Vol. 34, pp. 722-734, 2010.
- D. J. Wang., C. C. Chiu., and C. M. Cheng., “Design of a six-axis cryogenic sample manipulator for angle-resolved photoemission spectroscopy, ” Diamond Light Source Proceedings, Vol. 1, e9, MEDSI-6, 2010.
- Y. S. Chen., C. C. Chiu., and Y. D. Cheng., “Dynamic analysis of disc spring effects on the contact pressure of collet/spindle interface in a high-speed spindle system, ” Proceedings of the Institution of Mechanical Engineers, Part C, Journal of Mechanical Engineering Science, Vol. 223, pp. 1191-1201, 2009.
- Y. S. Chen., C. C. Chiu., and Y. D. Cheng., “Investigating the influence of geometric parameters on the gas bearing static stiffness with the experimental and numerical methods, ” Journal of Chinese Institute of Engineers, Vol. 32, No. 4, pp. 489-500, 2009.
- Y. S. Chen., Y. D. Cheng., J. J. Liao., and C. C. Chiu., “Electromagnetic–rotordynamic integrated vibration analysis for electrical machines, ” Journal of Chinese Institute of Engineers, Vol. 223, No. 11, pp. 2549-2559, 2009.
- Y. S. Chen., Y. D. Cheng., J. J. Liao., and C.C. Chiu., “Development of a finite element solution module for the analysis of the dynamic behavior and balancing effects of an induction motor system, ” Finite Elements in Analysis and Design, Vol. 44, No. 8, pp. 483-492, May, 2008.
- Y. S. Chen., Y. D. Cheng., and C.C. Chiu., “The critical speeds of a machine tool spindle-bearing system with the high stiffness hydrostatic journal bearings, ” American Society for Precision Engineering Proceedings of The Twenty-second Annual ASPE Meeting, Dallas, Texas, October, 2007.
|