中心簡介 / 同仁通訊錄

高頻小組


姓名： 張美霞( Mei-Hsia Chang )
分機： 6334
電子郵件： mhchang@nsrrc.org.tw
學歷：
  • 大同大學機械工程研究所碩士(1999~2001)
  • 大同大學機械工程研究所博士(2001~2005)
經歷：
  • 神達科技股份公司(2005~2006)
  • 同步輻射研究中心助工程師(2006~2016)
  • 同步輻射研究中心副工程師(2017~迄今)
研究領域：
  • 系統熱流設計與分析
  • 超導高頻模組低溫及真空系統
  • 高潔淨無塵室操作技術
代表作：
  • M.H. Chang and C. H. Cheng, “Predictions of Lid-Driven Flow and Heat Convection in an Arc-Shape Cavity,” Int. Comm. Heat Mass Transfer, Vol. 26, pp. 829-838, 1999.
  • C. H. Cheng, and M. H. Chang, “Shape Identification by Inverse Heat Transfer Method,” Journal of Heat Transfer, Vol. 125, pp. 224-231, 2003.
  • C. H. Cheng, and M. H. Chang, “Shape Design for a Cylinder with Uniform Temperature Distribution on the Outer Surface by Inverse Heat Transfer Method,” Int. J. of Heat and Mass Transfer, Vol. 46, pp. 101-111, 2003.
  • C. H. Cheng, and M. H. Chang, “Shape Identification for Water-Ice Interface within the Cylindrical Capsule in Cold Storage System by Inverse Heat Transfer Method”, Int. J. of Refrigeration, Vol. 26, pp. 543-550, 2003.
  • C. H. Cheng, and M. H. Chang, “A Simplified Conjugate-Gradient Method for Shape Identification Based on Thermal Data,” Numerical Heat Transfer, Part B, Vol. 43, pp. 1-19, 2003.
  • C. H. Cheng, and M. H. Chang, “Shape Design for Surface of a Slider by Inverse Method,” submitted to ASME J. of Tribology, Vol.126, pp. 519-526, 2004.
  • C. H. Cheng, and M. H. Chang, “Identification of Unknown Geometry and Temperature for Heating Elements Embedded in a Rectangular Package,” ASME J. Heat Transfer, Vol. 127, pp. 918-930, 2005.
  • C. H. Cheng, and M. H. Chang, “Design of Irregular Slider Surface for Satisfying Specified Load Demands,” ASME J. Mechanical Design, Vol. 127, pp. 1184-1190, 2005.
  • C. H. Cheng, and M. H. Chang, “Predictions of Internal Temperature Distribution of PEMFC by Nondestructive Inverse Method,” J. Power Sources, Vol. 139, pp. 115-125, 2005.
  • M. H. Chang and C. H. Cheng, “Optimal Design of Slider Shape for Satisfying Load Demands under Specified Operation Conditions,” Tribology International, Vol. 38, pp. 757-768, 2005.
  • M. H. Chang and C. H. Cheng, “Non-destructive Inverse Method for Determination of Irregular Internal Temperature Distribution in PEMFCs,” J. Power Sources, Vol. 142, pp. 200-210, 2005.
  • C. H. Cheng, and M. H. Chang, “The Optimization for the Shape Profile of the Slider Surface under Ultra-Thin Film Lubrication Conditions by the Rarefied Flow Model”, ASME J. Mechanical Design, Vol. 131, No. 10, pp. 101010-1 to -10, 2009.
  • M. C. Lin, Ch. Wang, M. H. Tsai, F. T. Chung, M. S. Yeh, T. T. Yang, M. H. Chang, and L. H. Chang, Suppression of Thermal Oscillation Induced by Liquid-nitrogen in the CESR-type SRF Module, IEEE Transactions on Applied Superconductivity, Vol. 19, pp. 1427-1431, 2009.
  • M. H. Chang, Ch. Wang, M. C. Lin, M. H. Tsai, L. H. Chang, M. S. Yeh, T. T. Yang, C. H. Lo, C. K. Liu, F. T. Chung, Y. H. Lin, T. C. Yu, and L. J. Chen, Calculation of the Cryogenic Loads on a Superconducting RF Module, IEEE Transactions on Applied Superconductivity, Vol. 21, pp. 1908-1913, 2011.
  • M. C. Lin, Ch. Wang, M. H. Chang, F. T. Chung, M. S. Yeh, Y. H. Lin, L. J. Chen, M. H. Tsai, T. T. Yang, C. H. Lo, T. C. Yu, T. H. Chang, F. Z. Hsiao, H. H. Tsai, W. S. Chiou, H. C. Li, and T. F. Lin, Operational Characteristics of the 200-m Flexible Cryogenic Transfer System, J. Supercond. Nov. Magn., Vol. 26, pp. 1479, 2013.
  • M. H. Chang, M. H. Tsai, Ch. Wang, M. C. Lin, F. T. Chung, M. S. Yeh, L. H. Chang, C. H. Lo, T. C. Yu, L. J. Chen, and Z. K. Liu, Pressure Drop of Two-phase Helium along Long Cryogenic Flexible Transfer Lines to Support a Superconducting RF Operation at Its Cryogenic Test Stand, SpringerPlus, 5:2077, 2016.
  • M. H. Chang, Ch. Wang, M. C. Lin, M. H. Tsai, and C. H. Lo, Cryogenic Considerations on SRF Operation at 2K for a Light Source Using a Standard 4.5K Cryo-plant, Particle Accelerator Conference (PAC), Vancouver, Canada, 2009.
  • M. H. Chang, Ch. Wang, M. C. Lin, F. Z. Hsiao, H. H. Tsai, M. S. Yeh, L. H. Chang, T.T. Yang, C.H. Lo, F.T. Chung, Y.H. Lin, T.C. Yu, and L.J. Chen, Design of a Cryogenic Regulation Valve Box for SRF Operation at TPS, International Particle Accelerator Conference (IPAC), San Sebastián, Spain, 2011.
  • M. H. Chang, Ch. Wang, M. C. Lin, M. S. Yeh, C. H. Lo, M. H. Tsai, P. Y. Chen, F. T. Chung, L. J. Chen, L. H. Chang, T. C. Yu, Z. K. Liu, and C. L. Tsai, Design and Operation of the Dual Return Valves to Stabilize Helium Vessel Pressure of the SRF Module, International Conference on Electrical, Mechanical and Industrial Engineering (ICEMIE), Phuket, Thailand, 2016.